Following situation with a COVID-19 layup, LERUS TC decided to extend the validity of Offshore Crane Operator Stage1,2,3 and Banksman, Rigging ...   Read More >

EN  RU

Maintenance of Dynamic Positioning Systems


Availability

Please, make Your payment for the reservation of the course not later than 2 banking days before the start of the course.

Date Time Cost
28 June 2021 - 30 June 2021 09:00 to 17:00 USD 1 000.00 * Book online
05 July 2021 - 07 July 2021 09:00 to 17:00 USD 1 000.00 * Book online
12 July 2021 - 14 July 2021 09:00 to 17:00 USD 1 000.00 * Book online
19 July 2021 - 21 July 2021 09:00 to 17:00 USD 1 000.00 * Book online
26 July 2021 - 28 July 2021 09:00 to 17:00 USD 1 000.00 * Book online
02 August 2021 - 04 August 2021 09:00 to 17:00 USD 1 000.00 * Book online
09 August 2021 - 11 August 2021 09:00 to 17:00 USD 1 000.00 * Book online
16 August 2021 - 18 August 2021 09:00 to 17:00 USD 1 000.00 * Book online
30 August 2021 - 01 September 2021 09:00 to 17:00 USD 1 000.00 * Book online
06 September 2021 - 08 September 2021 09:00 to 17:00 USD 1 000.00 * Book online
13 September 2021 - 15 September 2021 09:00 to 17:00 USD 1 000.00 * Book online
20 September 2021 - 22 September 2021 09:00 to 17:00 USD 1 000.00 * Book online
27 September 2021 - 29 September 2021 09:00 to 17:00 USD 1 000.00 * Book online
* Payment in UAH equivalent, according to the commercial exchange rate on the payment date

Purpose

The purpose of this course is to provide Dynamic Positioning Technical Maintenance training to a standard adequate to fulfil the requirements of the industry and of the various legal bodies and institutions involved.

Certification

This course "Maintenance of the DP systems" is certified
by Bureau Veritas certification company.

Content

The training will follow the programme as outlined by the manufacturer of the DP system, which follows the recommendations contained in The International Marine Contractors Association (IMCA) guidelines.

  • Outlining the national and international rules and regulations valid for Dynamic Positioning operations
  • Technical knowledge of the computers in the DP system
  • Preventive and corrective maintenance of the DP system
  • System documentation

Objectives

Learn to identify faulty units and exchange these with spares from stock on board and bring the DP system back into operation.

Receive introduction to system documentation in order to perform periodic maintenance, and to communicate with service personnel when assistance is needed

Admission Requirements

Engineer license

Target Personnel

Electrical/electronic engineers and maintenance personnel who are responsible for the daily maintenance of the DP system.

Duration

3 days

Participants

Maximum 6

Language

The course will be conducted in English.